BATTERY CURRENT SENSOR INSPECTION

PROCEDURE


  1. INSPECT BATTERY CURRENT SENSOR ASSEMBLY


    1. A01VK0PE20
      Text in Illustration
      *a

      Component without harness connected

      (Battery Current Sensor Assembly)

      Check the resistance of the battery current sensor.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2 (VC5) - 4 (E2) Always 0.1 to 10 kΩ
        2 (VC5) - 3 (IB) Always Below 0.5 kΩ
        3 (IB) - 4 (E2) Always 0.05 to 10 kΩ

        If the result is not as specified, replace the battery current sensor assembly.

    2. A01VHCWE01
      Text in Illustration
      *a

      Component without harness connected

      (Battery Current Sensor Assembly)
      *b [kΩ]
      *c [°C]

      Check the resistance of the battery current sensor assembly.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (THB) - 4 (E2) 20°C (68°F) to 30°C(86°F) 1.5 to 2.5 kΩ

        If the result is not as specified, replace the battery current sensor assembly.

        Tech Tips

        The "Condition" indicates the temperature in the vicinity of the sensor, not of the actual sensor itself.