BATTERY CURRENT SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Tech Tips

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.( Click here)

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE BATTERY CURRENT SENSOR ASSEMBLY (for TMC Made)


    1. A0047SHE03
      Text in Illustration
      *1 No. 3 Engine Wire
      *2 Battery Current Sensor Assembly

      Loosen the nut and disconnect the negative battery terminal.

    2. Remove the nut and terminal, and disconnect the No. 3 engine wire.

    3. Disconnect the connector and remove the battery current sensor.

  4. REMOVE BATTERY CURRENT SENSOR ASSEMBLY (for TMMF Made)


    1. A00477LE01
      Text in Illustration
      *1 Engine Wire
      *2 Battery Current Sensor Assembly

      Remove the nut and battery current sensor.

    2. Disconnect the engine wire.

    3. Disengage the clamp and disconnect the connector.