BATTERY CURRENT SENSOR(w/o Stop And Start System) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. REMOVE BATTERY CURRENT SENSOR ASSEMBLY


    1. A004AEK

      Disengage the clamp and battery current sensor assembly connector from the battery current sensor assembly.

    2. A0048YQ

      Remove the nut to disconnect the battery current sensor assembly and engine wire from the negative (-) battery terminal.