GENERATOR(for VALEO Made) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE NO. 1 ENGINE COVER

    Click here

  4. REMOVE FAN AND GENERATOR V BELT

    Click here

  5. REMOVE OIL LEVEL DIPSTICK SUB-ASSEMBLY

    Click here

  6. REMOVE OIL LEVEL DIPSTICK GUIDE

    Click here

  7. REMOVE OIL LEVEL DIPSTICK GUIDE O-RING

    Click here

  8. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

    Click here

  9. REMOVE GENERATOR ASSEMBLY


    1. B0046CD

      Remove the No. 1 terminal cap from the generator assembly.

    2. B004629

      Remove the nut to disconnect the engine wire from terminal B.

    3. Disconnect the generator assembly connector.

    4. Disconnect the compressor with pulley assembly connector.

    5. Disengage the clamp to disconnect the wire harness from the wire harness clamp bracket.

    6. B00464T

      Remove the 3 bolts and 2 wire harness clamp brackets from the generator assembly.

    7. Disengage the 2 clamps and remove the wire harness clamp bracket from the engine wire.

    8. B0047C6

      Remove the 2 bolts and generator assembly from the timing chain cover assembly.