GENERATOR(for TMMF Made) INSTALLATION

PROCEDURE


  1. INSTALL GENERATOR ASSEMBLY

    A01VIFSE01

    1. Provisionally install the generator with fixing bolt B.

    2. A01VI83E03

      Provisionally install the fan belt adjusting bar with fan belt adjusting slider fixing bolts A and B, then move the generator toward the cylinder block and tighten bolt B.

      Torque:
      34 N*m  { 347 kgf*cm, 25 ft.*lbf }
    3. A01VHCZ

      Install the connector and 2 wire harness clamps.

    4. Install terminal B with the nut.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    5. Install the terminal cap.

  2. INSTALL FAN AND GENERATOR V BELT

    Click here

  3. INSPECT FAN AND GENERATOR V BELT

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }