NOISE FILTER INSTALLATION

PROCEDURE


  1. INSTALL RADIO SETTING CONDENSER


    1. A01VGXD

      Engage the claw to install a new terminal cover to the wire harness.

    2. A01VKNL

      Engage the 3 claws to install the new terminal cover with the wire harness to a new condenser.

    3. Engage the clamp to temporarily install a new condenser with the wire harness to the body.

    4. Install the new condenser with the bolt.

      Torque:
      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

  2. INSTALL DOOR CONTROL RECEIVER (for 5 Door)

    Click here

  3. INSTALL DOOR CONTROL RECEIVER (for 3 Door)

    Click here