AUDIO AND VISUAL SYSTEM(for Radio and Display Type) Cellular Phone cannot Send/Receive

PROCEDURE

1. Click here

   CHECK "Bluetooth" SETTINGS

   
   

   1. Check if the cellular phone is registered as a connected device and the "Bluetooth" settings are correct.

      OK
      The cellular phone is registered as a connected device and "Bluetooth" settings are correct.

   
   
   • OKClick here
   • NG

     SET SETTINGS CORRECTLY

2. Click here

   CHECK SETTINGS AND CONDITIONS

   
   

   1. Check the cellular phone functions.

      Tip:

      The cellular phone is unable to call under any of the following conditions:

      
      

      • The cellular phone is locked.

      • The phonebook is being transferred.

      • The line is crossed.

      • The cellular phone is outside service range.

      • The power is off.

      • The battery is low.

      • The cellular phone is not connected to "Bluetooth".

      OK
      None of the above conditions exist.

   
   
   • OKClick here
   • NG

     SET CORRECTLY

3. Click here

   CHECK RECEPTION

   
   

   1. Place the cellular phone close to the radio and display assembly.

   2. Set the cellular phone so that it can receive calls.

   3. Check if the cellular phone has reception according to the radio and displayassembly.

      OK
      The cellular phone has reception.

   
   
   • OK

     END

   • NGClick here
4. Click here

   CHECK CELLULAR PHONE

   
   

   1. Check if the cellular phone can make a call.

      Tip:

      The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.

      OK
      Cellular phone can make a call.

   
   
   • OKClick here
   • NG

     REPAIR OR REPLACE CELLULAR PHONE

5. Click here

   RESTART CELLULAR PHONE

   
   

   1. Restart the cellular phone.

   2. Register the cellular phone as a connected device again and check that the malfunction disappears.

      OK
      Malfunction disappears.

   
   
   • OK

     END

   • NGClick here
6. Click here

   CHECK CELLULAR PHONE

   
   

   1. Check if the cellular phone is "Bluetooth" compatible.

      Tip:

      Some versions of "Bluetooth" compatible cellular phones may not function.

      OK
      The phone is "Bluetooth" compatible.

   
   
   • OK

     END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)

   • NG

     PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)