AUDIO AND VISUAL SYSTEM(for Radio and Display Type) TERMINALS OF ECU


  1. RADIO AND DISPLAY RECEIVER ASSEMBLY

    A01VHD3E02
    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    F113-1 (FR+) - F113-7 (GND1) LG - BR Sound signal (Front Right) Audio system playing A waveform synchronized with sounds is output
    F113-2 (FL+) - F113-7 (GND1) P - BR Sound signal (Front Left) Audio system playing A waveform synchronized with sounds is output
    F113-3 (ACC1) - F113-7 (GND1) GR - BR Power source (ACC) Ignition switch off Below 1 V
    Ignition switch ACC 11 to 14 V
    F113-4 (+B1) - F113-7 (GND1) SB - BR Power source (+B) Always 11 to 14 V
    F113-5 (FR-) - F113-7 (GND1) L - BR Sound signal (Front Right) Audio system playing A waveform synchronized with sounds is output
    F113-6 (FL-) - F113-7 (GND1) V - BR Sound signal (Front Left) Audio system playing A waveform synchronized with sounds is output
    F113-7 (GND1) - Body ground BR - Body ground Ground Always Below 1 V
    F113-9 (AMP) - F113-7 (GND1)*1 SB - BR Power source of stereo component amplifier Audio system playing 11 to 14 V
    F113-10 (ILL+) - F113-7 (GND1) G - BR Illumination signal Light control switch off Below 1 V
    Light control switch tail or head 11 to 14 V
    F114-1 (RR+) - F113-7 (GND1) R - BR Sound signal (Rear Right) Audio system playing A waveform synchronized with sounds is output
    F114-2 (RL+) - F113-7 (GND1) B - BR Sound signal (Rear Left) Audio system playing A waveform synchronized with sounds is output
    F114-3 (RR-) - F113-7 (GND1) W - BR Sound signal (Rear Right) Audio system playing A waveform synchronized with sounds is output
    F114-6 (RL-) - F113-7 (GND1) Y - BR Sound signal (Rear Left) Audio system playing A waveform synchronized with sounds is output
    F115-1 (IG) - F113-7 (GND1) LG - BR Power source (IG) Ignition switch off Below 1 V
    Ignition switch ON 11 to 14 V
    F115-4 (MACC) - F113-7 (GND1) R - BR Microphone power supply Ignition switch off Below 1 V
    Ignition switch ACC 4 to 6 V
    F115-5 (MIN+) - F113-7 (GND1) B - BR Microphone voice signal

    See "Microphone & Voice Recognition Check"

    Click here

    -
    F115-6 (SNS2) - F113-7 (GND1) GR - BR Microphone connection detection signal Always Below 1 V
    F115-9 (CANH) BE CAN communication signal - -
    F115-10 (CANL) W CAN communication signal - -
    F115-11 (AGND) - Body ground Shield - Body ground Shield ground Always Below 1 V
    F115-17 (SPD) - F113-7 (GND1) V - BR Speed signal from combination meter

    See "Vehicle Signal Check Mode" in Operation Check

    Click here

    -
    F115-18 (SGND) - Body ground Shielded - Body ground Shield ground Always Below 1 V
    F115-19 (MIN-) - F113-7 (GND1) W - BR Microphone voice signal

    See "Microphone & Voice Recognition Check"

    Click here

    -
    F115-21 (SW1) - F113-7 (GND1) L - BR Steering pad switch signal Steering pad switch not operated 3.3 V or higher
    SEEK+ switch pushed Below 0.6 V
    SEEK- switch pushed Approximately 0.9 V
    VOL+ switch pushed Approximately 1.5 V
    VOL- switch pushed Approximately 2.4 V
    F115-22 (SW2) - F113-7 (GND1) P - BR Steering pad switch signal Steering pad switch not operated 3.3 V or higher
    MODE switch pushed Below 0.6 V
    On hook switch pushed Approximately 0.9 V
    Off hook switch pushed Approximately 1.5 V
    F115-23 (SWG) - F113-7 (GND1) R - BR Steering pad switch ground Always Below 1 V
    F115-25 (ADPG) - F113-7 (GND1) R - BR External device connection detection signal External device connected Below 1 V
    F115-26 (VAR+) - F113-7 (GND1) R - BR Sound signal (Right) External device playing (When stereo jack used) A waveform synchronized with sounds is output
    F115-27 (VA-) - F113-7 (GND1) W - BR Ground Always Below 1 V
    F115-28 (VAL+) - F113-7 (GND1) B - BR Sound signal (Left) External device playing (When stereo jack used) A waveform synchronized with sounds is output
    F47-15 (PKB) - F113-7 (GND1) P - BR Parking brake signal

    See "Vehicle Signal Check Mode" in Operation Check

    Click here

    -
    F119-1 # Power source - -
    F119-2 # Data signal - -
    F119-3 # Data signal - -
    F119-4 # Ground - -
    F119-5 # Shield ground - -
    F125-11 (CA+) - F113-7 (GND1)*2 R - BR Television camera power supply

    Ignition switch ON

    Shift lever in R

    5.5 to 7.05 V
    F125-12 (V+) - F113-7 (GND1)*2 B - BR Television camera image signal

    Ignition switch ON

    Shift lever in R

    Camera lens is not covered, displaying an image

    Pulse generation

    (Refer to waveform 1)

    Ignition switch ON

    Shift lever in R

    Camera lens is covered, blacking out screen

    Pulse generation

    (Refer to waveform 2)

    F125-23 (CGND) - Body ground*2 Shield - Body ground Shield ground Always Below 1 V
    F125-24 (V-) - F113-7 (GND1)*2 W - BR Ground Always Below 1 V
    RA-5 (ANT+) - Body ground # - Body ground Power source of antenna

    Ignition switch ACC

    Radio switch on and FM or AM selected

    11 to 14 V

    • *1: for 8 Speakers

    • *2: w/ Rear View Monitor

    • #: There is no wire color information


    1. Reference (Oscilloscope waveform):

      A01VGNQE01

      1. Waveform 1 (camera lens is not covered, displaying an image)

        Item Content
        Measurement terminal F125-12 (V+) - F113-7 (GND1)
        Measurement setting 200 mV/DIV., 50 μsec./DIV.
        Condition Ignition switch ON, shift lever in R

        Tech Tips

        The video waveform changes according to the image sent by the television camera assembly.

      2. Waveform 2 (camera lens is covered, blacking out the screen)

        Item Content
        Measurement terminal F125-12 (V+) - F113-7 (GND1)
        Measurement setting 200 mV/DIV., 50 μsec./DIV.
        Condition Ignition switch ON, shift lever in R

        Tech Tips

        The video waveform changes according to the image sent by the rear television camera assembly.

        Text in Illustration
        *a Waveform 1 (camera lens not covered, displaying an image)
        *b Waveform 2 (camera lens covered, blacking out the screen)
        *c Synchronization Signal
        *d Video Waveform
  2. STEREO COMPONENT AMPLIFIER ASSEMBLY (for 8 Speakers)

    A01VEA9E02
    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    K47-1 (RL+) - K47-10 (GND) P - W-B Sound signal (Front Left) Audio system playing A waveform synchronized with sounds is output
    K47-2 (RR+) - K47-10 (GND) LG - W-B Sound signal (Front Right) Audio system playing A waveform synchronized with sounds is output
    K47-3 (WFR+) - K47-10 (GND) LG - W-B Sound signal (Front Right) Audio system playing A waveform synchronized with sounds is output
    K47-4 (WFL+) - K47-10 (GND) P - W-B Sound signal (Front Left) Audio system playing A waveform synchronized with sounds is output
    K47-5 (+B) - K47-10 (GND) G - W-B Power source (+B) Always 11 to 14 V
    K47-6 (RL-) - K47-10 (GND) V - W-B Sound signal (Front Left) Audio system playing A waveform synchronized with sounds is output
    K47-7 (RR-) - K47-10 (GND) L - W-B Sound signal (Front Right) Audio system playing A waveform synchronized with sounds is output
    K47-8 (WFR-) - K47-10 (GND) L - W-B Sound signal (Front Right) Audio system playing A waveform synchronized with sounds is output
    K47-9 (AMP+) - Body ground SB - Body ground Power source of stereo component amplifier Audio system playing 11 to 14 V
    K47-10 (GND) - Body ground W-B - Body ground Ground Always Below 1 V
    K47-11 (WFL-) - K47-10 (GND) V - W-B Sound signal (Front Left) Audio system playing A waveform synchronized with sounds is output
    K47-12 (ACC) - K47-10 (GND) GR - W-B Power source (ACC) Ignition switch off Below 1 V
    Ignition switch ACC 11 to 14 V