PROCEDURE
REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)
REMOVE SPARE WHEEL COVER (w/ Cover)
REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)
REMOVE REAR DOOR SCUFF PLATE LH (for 5 Door)
Tech Tips
Use the same procedure as for the RH side Click here.
REMOVE FRONT DOOR SCUFF PLATE LH (for 3 Door)
Tech Tips
Use the same procedure as for the RH side Click here.
SEPARATE REAR DOOR OPENING TRIM WEATHERSTRIP LH (for 5 Door)
Separate the rear door opening trim weatherstrip LH.
SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH (for 3 Door)
Separate the front door opening trim weatherstrip LH.
REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH (for 3 Door)
Tech Tips
Use the same procedure as for the RH side Click here.
REMOVE REAR FLOOR FINISH PLATE
SEPARATE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH (for 5 Door)
Tech Tips
Use the same procedure as for the RH side Click here.
SEPARATE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH (for 3 Door)
Tech Tips
Use the same procedure as for the RH side Click here.
REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for 5 Door)
Tech Tips
Use the same procedure as for the RH side Click here.
REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for 3 Door)
Tech Tips
Use the same procedure as for the RH side Click here.
REMOVE ROOF SIDE INNER GARNISH LH (for 5 Door)
Tech Tips
Use the same procedure as for the RH side Click here.
REMOVE ROOF SIDE INNER GARNISH LH (for 3 Door)
Tech Tips
Use the same procedure as for the RH side Click here.
REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER
Disconnect the connector from the tire pressure warning ECU and receiver.
Remove the bolt.
Disengage the 2 tabs from the holes to remove the tire pressure warning ECU and receiver.