FRONT SHOCK ABSORBER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side as for the LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY

    Click here

  2. REMOVE FRONT NO. 1 VENTILATOR SEAL

    Click here

  3. REMOVE FRONT AIR SHUTTER SEAL RH

    Click here

  4. REMOVE INNER COWL TOP TO COWL BRACE

    Click here

  5. REMOVE OUTER COWL TOP PANEL

    Click here

  6. REMOVE FRONT WHEEL

  7. SEPARATE FRONT STABILIZER LINK ASSEMBLY


    1. A000KWI

      Remove the nut and separate the front stabilizer link assembly from the shock absorber.

      Tech Tips

      Using a socket hexagon wrench 6 to hold the stud.

  8. SEPARATE FRONT FLEXIBLE HOSE


    1. A000I1I

      Remove the bolt and separate the front speed sensor and front flexible hose.

  9. REMOVE FRONT SUSPENSION SUPPORT DUST COVER

  10. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING


    1. A000FH2

      Remove the 2 nuts and 2 bolts and separate the front shock absorber with coil spring from the steering knuckle.

      Tech Tips

      Keep the bolt from rotating while loosening and removing the nuts.

    2. A000K6E

      Using a socket hexagon wrench 6, fix the front shock absorber rod and remove the nut.

    3. Remove the front No. 2 suspension support.

    4. Remove the front shock absorber with coil spring from the vehicle.

  11. REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY

  12. REMOVE FRONT COIL SPRING UPPER SEAT


    1. A000KM8

      Using a socket hexagon wrench 6, fix the shock absorber rod and loosen the nut.

    2. A004ACOE03

      Using SST, compress the front coil spring.

      SST
      09727-30021   ( 09727-00010, 09727-00021, 09727-00031 )

      Note

      Do not use an impact wrench. It will damage SST.

    3. Remove the nut.

    4. Remove the front coil spring upper seat with the strut mounting bearing and front spring bumper from the front shock absorber.

  13. REMOVE FRONT SPRING BUMPER


    1. Remove the front spring bumper from the front coil spring upper seat.

  14. REMOVE FRONT COIL SPRING UPPER INSULATOR

  15. REMOVE FRONT COIL SPRING

  16. REMOVE STRUT MOUNTING BEARING


    1. A000DEM

      Using a brass bar and press, remove the strut mounting bearing from the front coil spring upper seat.