REAR AXLE HUB(for TMC Made) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side as for the LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL

  2. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY

  3. SEPARATE SKID CONTROL SENSOR WIRE

    Click here

  4. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY


    1. A01VDIB

      Remove the 4 bolts and remove the axle hub and bearing from the axle beam.