REAR SHOCK ABSORBER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side as for the LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL

  2. REMOVE REAR ABSORBER CAP

  3. REMOVE REAR SHOCK ABSORBER ASSEMBLY


    1. Support the rear axle beam assembly with a jack. Insert a wooden block between the jack and the rear axle spring seat to prevent damage.

    2. A01VFGJ

      Remove the 2 nuts while keeping the piston rod from rotating.

    3. Remove the rear shock absorber cushion retainer and rear suspension support.

    4. A01VIG0

      Remove the bolt while keeping the nut from rotating and remove the rear shock absorber assembly.

      Note

      Remove the nut from the bolt side because the one on the lower side is a jam nut.

  4. REMOVE REAR SUSPENSION SUPPORT STOPPER

  5. REMOVE REAR SUSPENSION SUPPORT ASSEMBLY