FRONT DRIVE SHAFT ASSEMBLY(for 2NR-FKE) INSPECTION

PROCEDURE


  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY


    1. A0047BB

      Check for noticeable looseness when turning the joint up and down, left and right, and in the thrust direction.

    2. Check for cracks, damage and grease leakage on the boot joint.

      Tech Tips

      Keep the drive shaft level while moving it.

    3. A0048NDE01

      Check dimension (A).

      Dimension (A)
      Drive Type LH Side RH Side
      for CVT 561.1 mm (1.84 ft.) 802.6 mm (2.63 ft.)
      for Manual Transaxle 561.8 mm (1.84 ft.) 803.8 mm (2.64 ft.)