FRONT DRIVE SHAFT ASSEMBLY(for 1ND-TV) REMOVAL

PROCEDURE

1. Click here

   REMOVE CENTER ENGINE UNDER COVER

2. Click here

   REMOVE ENGINE UNDER COVER LH

3. Click here

   REMOVE ENGINE UNDER COVER RH

4. Click here

   DRAIN TRANSAXLE OIL

   for EC65: (Click here)

   for EC69: (Click here)

5. Click here

   REMOVE FRONT WHEEL

6. Click here

   REMOVE FRONT AXLE SHAFT NUT LH

   Click here

7. Click here

   REMOVE FRONT AXLE SHAFT NUT RH

   Tip:

   Use the same procedure for the RH side as for the LH side.

8. Click here

   SEPARATE FRONT SPEED SENSOR LH

   Click here

9. Click here

   SEPARATE FRONT SPEED SENSOR RH

   Tip:

   Use the same procedure for the RH side as for the LH side.

10. Click here

    SEPARATE FRONT STABILIZER LINK ASSEMBLY LH

    Click here

11. Click here

    SEPARATE FRONT STABILIZER LINK ASSEMBLY RH

    Tip:

    Use the same procedure for the RH side as for the LH side.

12. Click here

    SEPARATE TIE ROD END SUB-ASSEMBLY LH

    Click here

13. Click here

    SEPARATE TIE ROD END SUB-ASSEMBLY RH

    Tip:

    Use the same procedure for the RH side as for the LH side.

14. Click here

    SEPARATE FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH

    Click here

15. Click here

    SEPARATE FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH

    Tip:

    Use the same procedure for the RH side as for the LH side.

16. Click here

    SEPARATE FRONT AXLE ASSEMBLY LH

    Click here

17. Click here

    SEPARATE FRONT AXLE ASSEMBLY RH

    Tip:

    Use the same procedure for the RH side as for the LH side.

18. Click here

    REMOVE FRONT DRIVE SHAFT ASSEMBLY LH

    
    
    1. 

       Using SST, remove the drive shaft as shown in the illustration.

       09520-01010
       09520-24010	09520-32040

       Note:
       

       • Do not damage the oil seal.

       • Do not damage the inboard joint boot.

       • Do not drop the drive shaft.

19. Click here

    REMOVE FRONT DRIVE SHAFT ASSEMBLY RH

    
    
    1. 

       Using a tire lever and brass bar, remove the drive shaft.

       Note:
       

       • Do not damage the oil seal.

       • Do not damage the inboard joint boot.

       • Do not drop the drive shaft.

20. Click here

    FIX FRONT AXLE ASSEMBLY

    09608-16042

    09608-02021

    09608-02041

    Tip:

    The hub bearing could be damaged if it is subjected to the vehicle's full weight, such as when moving the vehicle with the drive shaft removed. If it is absolutely necessary to place the vehicle's full weight on the hub bearing, first support it with SST.