STEERING KNUCKLE(for TMC Made) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side as for the LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT AXLE ASSEMBLY

    Click here

  2. REMOVE FRONT AXLE HUB HOLE SNAP RING

    Click here

  3. REMOVE FRONT AXLE HUB SUB-ASSEMBLY

    Click here

  4. REMOVE FRONT DISC BRAKE DUST COVER


    1. A01VJU2

      Remove the disc brake dust cover by tapping the back side with a brass bar and hammer.

  5. REMOVE FRONT AXLE HUB BEARING

    A01VEG5E07

    1. Install the removed axle hub bearing inner race onto the outer side of the axle hub bearing.

    2. Using SST and a press, remove the axle hub bearing.

      SST
      09223-15020
      09387-02010
      09950-60010   ( 09951-00630 )
      09950-70010   ( 09951-07100 )