OIL PRESSURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL OIL PRESSURE SENSOR

   
   

   1. Coat the oil pressure sensor O-ring with Toyota Genuine CVT Fluid TC.

      Note

      When reusing the oil pressure sensor, inspect the O-ring.

   2. Using SST, install the oil pressure sensor onto the continuously variable transaxle.

      SST

      09268-46012

      Torque:

      29 N*m  { 296 kgf*cm, 21 ft.*lbf }

   3. Connect the oil pressure sensor connector.

2. INSPECT FOR CVT FLUID LEAK

3. INSTALL ENGINE UNDER COVER LH

   Click here

4. RESET MEMORY (CVT oil pressure calibration)

   Click here