TRANSMISSION CONTROL CABLE ADJUSTMENT

PROCEDURE


  1. SECURE VEHICLE


    1. Fully apply the parking brake and chock a wheel.

      CAUTION:


      • A004763

        Make sure to apply the parking brake and chock a wheel before performing this procedure.

      • If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.

  2. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  3. ADJUST SHIFT LEVER POSITION


    1. Apply the parking brake and move the shift lever to N.

    2. A004AWMC03
      *1 Adjuster Case
      *2 Cover

      Slide the cover in the direction shown by the arrow.

    3. A0047SPC03
      *1 Adjuster Case
      *2 Lock Piece

      Using a precision screwdriver, pull up the lock piece.

    4. A00471IC03
      *1 Cable Rod

      Using your fingers, gently pull the cable rod towards the rear of the vehicle to remove backlash.

    5. A004BBPC04
      *1 Adjuster Case
      *2 Lock Piece

      Push in the lock piece to lock it.

    6. A0047PJC03
      *1 Adjuster Case
      *2 Lock Piece
      *3 Cover

      Slide the cover in the direction shown by the arrow.

      Note

      If the cover is not moved far enough, it will not engage with the lock piece, the cable rod will not be able to lock, and reliable shift operation will not be possible.

  4. INSTALL REAR CONSOLE BOX ASSEMBLY

    Click here