PARK / NEUTRAL POSITION SWITCH ADJUSTMENT

PROCEDURE


  1. SECURE VEHICLE


    1. Fully apply the parking brake and chock a wheel.

      CAUTION:


      • A004763

        Make sure to apply the parking brake and chock a wheel before performing this procedure.

      • If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.

  2. REMOVE NO. 1 ENGINE COVER

    Click here

  3. DISCONNECT NO. 2 VENTILATION HOSE

    Click here

  4. SEPARATE NO. 2 VACUUM SWITCHING VALVE ASSEMBLY

    Click here

  5. DISCONNECT NO. 1 AIR HOSE

    Click here

  6. REMOVE AIR CLEANER HOSE ASSEMBLY

    Click here

  7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  8. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    Click here

  9. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  10. ADJUST PARK/NEUTRAL POSITION SWITCH


    1. Remove the shift lever cap and move the shift lever to N.

    2. A004732

      Loosen the 2 bolts of the park/neutral position switch.

    3. A0046ZHC06
      *a Neutral Basic Line
      *b Protrusion

      Align the protrusion with the neutral basic line.

    4. Hold the park/neutral position switch in that position and tighten the 2 bolts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  11. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  12. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    Click here

  13. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  14. INSTALL AIR CLEANER HOSE ASSEMBLY

    Click here

  15. CONNECT NO. 1 AIR HOSE

    Click here

  16. INSTALL NO. 2 VACUUM SWITCHING VALVE ASSEMBLY

    Click here

  17. CONNECT NO. 2 VENTILATION HOSE

    Click here

  18. INSTALL NO. 1 ENGINE COVER

    Click here

  19. INSPECT PARK/NEUTRAL POSITION SWITCH

    Click here