FRONT DIFFERENTIAL OIL SEAL REPLACEMENT

PROCEDURE


  1. REMOVE FRONT DRIVE SHAFT ASSEMBLIES

    Click here

  2. REMOVE FRONT DRIVE SHAFT OIL SEAL LH


    1. A0049FRN05

      Using SST, remove the front drive shaft oil seal LH from the transaxle case.

      SST
      09308-00010

      Note

      Do not damage the transaxle case.

  3. REMOVE FRONT DRIVE SHAFT OIL SEAL RH


    1. A004AXLN01

      Using SST, remove the front drive shaft oil seal RH from the transaxle housing.

      SST
      09308-00010

      Note

      Do not damage the transaxle housing.

  4. INSTALL FRONT DRIVE SHAFT OIL SEAL RH


    1. Coat the lip of a new front drive shaft oil seal RH with MP grease.

    2. A0047XMC01
      *a Depth

      Using SST and a hammer, install the front drive shaft oil seal RH to the transaxle housing.

      SST
      09554-14010
      09950-70010   ( 09951-07100 )
      Standard Depth
      1.5 to 2.5 mm (0.0591 to 0.0984 in.)

      Note


      • Be sure to install the front drive shaft oil seal RH in the correct direction.

      • Do not damage the lip of the front drive shaft oil seal RH.

  5. INSTALL FRONT DRIVE SHAFT OIL SEAL LH


    1. Coat the lip of a new front drive shaft oil seal LH with MP grease.

    2. A004BEBC05
      *a Depth

      Using SST and a hammer, install the front drive shaft oil seal LH to the transaxle case.

      SST
      09387-00010
      09950-70010   ( 09951-07150 )
      Standard Depth
      6.7 to 7.7 mm (0.264 to 0.303 in.)

      Note


      • Be sure to install the front drive shaft oil seal LH in the correct direction.

      • Do not damage the lip of the front drive shaft oil seal LH.

  6. INSTALL FRONT DRIVE SHAFT ASSEMBLIES

    Click here