SHIFT PADDLE SWITCH REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

Click here

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. POSITION FRONT WHEELS FACING STRAIGHT AHEAD

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:


    • Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    • If an SRS part is accidentally deployed, it may cause a serious injury.

    B0045WR

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. REMOVE LOWER NO.2 STEERING WHEEL COVER

    Click here

  5. REMOVE STEERING PAD

    Click here

  6. REMOVE STEERING WHEEL ASSEMBLY

    Click here

  7. REMOVE STEERING PAD SWITCH ASSEMBLY

    Click here

  8. REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)

    B00463R

    1. Remove the 2 screws.

    2. Disengage the 4 pins and remove the 2 shift paddle switches (transmission shift switch assembly).

  9. REMOVE NO. 1 SWITCH WIRE


    1. B0047DE

      Disengage the 6 guides to remove the shift paddle switch with No. 1 switch wire from the steering wheel assembly.

    2. B0046BHC15
      *1 Clamp

      Remove the 2 clamps.

    3. Disconnect the 2 connectors to remove the 2 shift paddle switches (transmission shift switch assembly) from the No. 1 switch wire.