TRANSMISSION REVOLUTION SENSOR INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL TRANSMISSION REVOLUTION SENSOR

   
   

   1. Apply manual transaxle oil to a new O-ring and install it to the transmission revolution sensor.

   2. Clean and degrease the bolt and the bolt installation hole.

   3. 

      Apply adhesive to 2 or 3 threads of the bolt end.

      Table 1. Text in Illustration

      *1

      Adhesive

      Adhesive
      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

   4. Install the transmission revolution sensor to the manual transaxle assembly with the bolt.

      7.8 N*m

      80 kgf*cm

      69 in.*lbf

   5. Connect the transmission revolution sensor connector.

2. Click here

   INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click here

3. Click here

   INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

   Click here

4. Click here

   INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click here