SHIFT LEVER ASSEMBLY DISASSEMBLY

PROCEDURE

1. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY

   
   

   1. 

      Disconnect the indicator light wire sub-assembly.

   2. 

      Disengage the 4 claws and remove the floor shift position indicator housing sub-assembly from the shift lock control unit assembly.

2. REMOVE POSITION INDICATOR LIGHT GUIDE

   
   

   1. 

      Disengage the 4 claws and remove the position indicator light guide from the floor shift position indicator housing sub-assembly.

3. REMOVE POSITION INDICATOR SLIDE COVER

   
   

   1. 

      Remove the position indicator slide cover from the shift lock control unit assembly.

4. REMOVE SHIFT LOCK RELEASE BUTTON

   
   

   1. 

      Remove the shift lock release button and the compression spring from the shift lock control unit assembly.

5. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY

   
   

   1. 

      Disengage the 3 clamps and separate the indicator light wire sub-assembly from the shift lock control unit assembly.

   2. 

      Remove the bulb and cap from the indicator light wire sub-assembly.

   3. 

      Text in Illustration

      *1	Protective Tape
      *a	Secondary Lock

      Using a screwdriver with its tip wrapped in protective tape, release the secondary lock.

   4. 

      Text in Illustration

      *a

      Mark

      Put marks on wire harnesses 6 and 8.

   5. Release the locking lugs of terminals 2, 4, 6 and 8, and pull the wire harness out of the terminals.

6. REMOVE SHIFT LEVER POSITION SENSOR

   
   

   1. 

      Disengage the claw and remove the wire harness clamp bracket from the shift lock control unit assembly.

   2. 

      Remove the 3 screws and the shift lever position sensor from the shift lock control unit assembly.

7. REMOVE SHIFT LOCK SOLENOID

   
   

   1. 

      Remove the 3 screws and the shift lock unit sub-assembly from the shift lock control unit assembly.

   2. 

      Remove the 2 screws and the shift lock solenoid from the shift lock unit sub-assembly.