SHIFT AND SELECT ACTUATOR REASSEMBLY

PROCEDURE


  1. INSTALL SHIFT STROKE SENSOR


    1. Apply MP grease to a new O-ring and install it to the shift stroke sensor.

    2. A01VFG8E04
      Text in Illustration
      *a Sensor Arm (Sensor Side)
      *b Sensor Arm (Actuator Side)

      Set the shift stroke sensor so that the sensor side and the actuator side sensor arms are in the positions shown in the illustration.

    3. A01VJW1

      Turn the shift stroke sensor clockwise and fix it with the 2 screws.

      Torque:
      1.3 N*m  { 13 kgf*cm, 12 in.*lbf }

  2. INSTALL SELECT STROKE SENSOR


    1. Apply MP grease to a new O-ring and install it to the select stroke sensor.

    2. A01VFG8E04
      Text in Illustration
      *a Sensor Arm (Sensor Side)
      *b Sensor Arm (Actuator Side)

      Set the select stroke sensor so that the sensor side and the actuator side sensor arms are in the positions shown in the illustration.

    3. A01VH9X

      Turn the select stroke sensor clockwise and fix it with the 2 screws.

      Torque:
      1.3 N*m  { 13 kgf*cm, 12 in.*lbf }