SELECT STROKE SENSOR INSTALLATION

PROCEDURE

1. INSTALL SELECT STROKE SENSOR

   
   

   1. Apply MP grease to a new O-ring and install it to the shift stroke sensor.

   2. 

      Text in Illustration

      *a	Sensor Arm (Sensor Side)
      *b	Sensor Arm (Actuator Side)

      Set the select stroke sensor so that the sensor side and the actuator side sensor arms are in the positions shown in the illustration.

   3. Turn the select stroke sensor clockwise and fix it with the 2 screws.

      Torque:

      1.3 N*m  { 13 kgf*cm, 12 in.*lbf }

2. INSTALL SHIFT AND SELECT ACTUATOR ASSEMBLY

   Click here