SHIFT AND SELECT LEVER SHAFT REASSEMBLY

PROCEDURE


  1. INSTALL SELECT STOPPER BLOCK


    1. Coat the select stopper block with gear oil.

    2. A01VF19E03

      Install the select stopper block as shown in the illustration.

      Note

      Make sure of the installation direction.

    3. A01VFTLE05
      Text in Illustration
      *a Depth

      Using a 5 mm pin punch and a hammer, install the slotted spring pin to the shift and select lever shaft.

      Standard depth
      -0.2 to 0.8 mm (-0.00787 to 0.0315 in.)

  2. INSTALL RELEASE HEAD STRAIGHT PIN


    1. A01VHIO

      Install the release head straight pin to the select stopper block.

    2. Coat the release head with gear oil.

    3. A01VICJE01

      Install the release head as shown in the illustration.

      Note

      Make sure of the installation direction.

    4. A01VGEEE03
      Text in Illustration
      *a Hook
      *b Hook side
      *c 14.5 to 15.5 mm (0.571 to 0.610 in.)
      *d 8.3 to 9.3 mm (0.327 to 0.366 in.)

      Install the release head torsion spring as shown in the illustration.

      Note

      Make sure of the installation direction.

    5. Coat the front inner shift lever with gear oil.

    6. A01VGFG

      Install the front inner shift lever as shown in the illustration.

      Note

      Make sure of the installation direction.

      Tech Tips

      Insert the release head torsion spring to the installation hole of the front inner shift lever.

    7. A01VKIBE03
      Text in Illustration
      *1 Release Head Spring
      *2 Release Head Straight Pin

      Turn the front inner shift lever counterclockwise to align it with the installation surface of the release head straight pin, and install it.

      Note

      Make sure that the front inner shift lever is installed as shown in the illustration.

    8. A01VF1XE05
      Text in Illustration
      *a Depth

      Using a 5 mm pin punch and a hammer, install the slotted spring pin to the shift and select lever shaft.

      Standard depth
      -0.2 to 0.8 mm (-0.00787 to 0.0315 in.)

  3. INSTALL INNER NO. 2 SHIFT LEVER


    1. Coat the inner No. 2 shift lever with gear oil.

    2. A01VK9QE03
      Text in Illustration
      *a Depth

      Using a 5 mm pin punch and a hammer, install the inner No. 2 shift lever and slotted spring pin to the shift and select lever shaft.

      Standard depth
      0 to 0.6 mm (0 to 0.0236 in.)

      Note

      Make sure of the installation direction.