Click here

BACK-UP LIGHT SWITCH INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT BACK-UP LIGHT SWITCH ASSEMBLY


    1. Check the resistance.


      1. A01VJM1E05

        Measure the resistance according to the value(s) in the table below.

        Table 1. Text in Illustration
        *a

        Component without harness connected

        (Back-up Light Switch Assembly)
        *b 1.1 mm (0.0433 in.)
        *c On (Pushed in)
        *d Off (Released)
        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        1 - 2 On (Pushed in) Below 1 Ω
        1 - 2 Off (Released) 10 kΩ or higher

        If the result is not as specified, replace the back-up light switch assembly.