Tech Tips
If trouble codes are displayed during the DTC check, check the circuit indicated by the DTC. For details of each code, refer to the page for the respective "DTC No." in the DTC chart.
Inspect the "Fuse" and "Relay" before inspecting the suspected areas as shown in the chart below.
*1: "Comes on" means the MIL (Malfunction Indicator Lamp) lights up.
*2: "Comes on" means the Multi-mode Manual Transaxle Warning Light lights up.
| DTC Code | Detection Item | Trouble Area | MIL*1 | Warning Light*2 | Memory | See page |
|---|---|---|---|---|---|---|
| P0500 | Vehicle Speed Sensor "A" | - Wire harness or connector - Vehicle speed signal circuit - TCM |
Does not come on | Come on | DTC stored | |
| P0562 | System Voltage | - Wire harness or connector - TCM |
Come on | Come on | DTC stored | |
| P0603 | Internal Control Module Keep Alive Memory (KAM) Error | - TCM | Does not come on | Come on | DTC stored | |
| P0613 | TCM Processor | - TCM | Does not come on | Come on | - | |
| P0617 | Starter Relay Circuit High | - Park/neutral position switch assembly - ST (Starter) relay - Wire harness or connector - Ignition switch - TCM - ECM |
Come on | Come on | DTC stored | |
| P0703 | Brake Switch "B" Circuit | - Wire harness or connector - Stop light switch - TCM |
Does not come on | Come on | DTC stored | |
| P0715 | Input / Turbine Speed Sensor Circuit Malfunction | - Wire harness or connector - Transmission revolution sensor - TCM |
Does not come on | Come on | DTC stored | |
| P0725 | Engine Speed Input Circuit | - Wire harness or connector - TCM - ECM |
Does not come on | Come on | DTC stored | |
| P0806 | Clutch Position Sensor "A" Circuit Range / Performance | - Clutch stroke sensor - Wire harness or connector - TCM |
Does not come on | Come on | DTC stored | |
| P0807 | Clutch Position Sensor (Low) | - Clutch stroke sensor - Wire harness or connector - TCM |
Come on | Come on | DTC stored | |
| P0808 | Clutch Position Sensor (High) | - Clutch stroke sensor - Wire harness or connector - TCM |
Come on | Come on | DTC stored | |
| P0810 | Clutch Position Control Error | - Clutch actuator assembly (clutch motor) - Clutch mechanical system (clutch cover, clutch disc, clutch release with bearing cylinder assembly and hydraulic line) - Clutch stroke sensor - TCM |
Does not come on | Come on | DTC stored | |
| P0820 | Gear Lever "X-Y" Position Sensor Circuit | - Shift lever position sensor - Wire harness or connector - TCM |
Does not come on | Come on | DTC stored | |
| P0821 | Gear Lever "X" Position Circuit | - Shift lock control unit assembly (Transmission shift main switch) - Wire harness or connector - TCM |
Does not come on | Come on | DTC stored | |
| P0885 | TCM Power Relay Control Circuit / Open | - MMT fuse - MMT relay - Wire harness or connector - TCM |
Does not come on | Come on | DTC stored | |
| P0887 | TCM Power Relay Control Circuit (Short) | - MMT relay - Wire harness or connector - TCM |
Does not come on | Come on | DTC stored | |
| P0900 | Clutch Actuator Circuit | - Clutch actuator assembly (clutch motor) - Wire harness or connector - TCM |
Does not come on | Come on | DTC stored | |
| P0905 | Gate Select Position Circuit Range / Performance | - Select stroke sensor - Wire harness or connector - TCM |
Does not come on | Come on | DTC stored | |
| P0906 | Gate Select Position Circuit Low | - Select stroke sensor - Wire harness or connector - TCM |
Come on | Come on | DTC stored | |
| P0907 | Gate Select Position Circuit High | - Select stroke sensor - Wire harness or connector - TCM |
Come on | Come on | DTC stored | |
| P0909 | Gate Select Control Error | - Select stroke sensor - Shift and select actuator assembly (select motor) - TCM - Transaxle assembly |
Does not come on | Come on | DTC stored | |
| P0910 | Gate Select Actuator Circuit | - Shift and select actuator assembly (select motor) - Wire harness or connector - TCM |
Does not come on | Come on | DTC stored | |
| P0915 | Gear Shift Position Circuit Range / Performance | - Shift stroke sensor - Wire harness or connector - TCM |
Does not come on | Come on | DTC stored | |
| P0916 | Gear Shift Position Circuit Low | - Shift stroke sensor - Wire harness or connector - TCM |
Come on | Come on | DTC stored | |
| P0917 | Gear Shift Position Circuit High | - Shift stroke sensor - Wire harness or connector - TCM |
Come on | Come on | DTC stored | |
| P0919 | Gear Shift Position Control Error | - Shift stroke sensor - Shift and select actuator assembly (shift motor) - TCM - Transaxle assembly |
Does not come on | Come on | DTC stored | |
| P0920 | Gear Shift Forward Actuator Circuit | - Shift and select actuator assembly (shift motor) - Wire harness or connector - TCM |
Does not come on | Come on | DTC stored | |
| U0100 | Lost Communication with ECM / PCM "A" | - Wire harness or connector - ECM - TCM |
Come on | Come on | DTC stored |