NEUTRAL POSITION SWITCH INSTALLATION

PROCEDURE

1. INSTALL NEUTRAL POSITION SWITCH

   
   

   1. Install a new gasket to the neutral position switch.

   2. Using SST, install the neutral position switch to the manual transaxle assembly.

      SST

      09817-16011

      Torque:

      40 N*m  { 410 kgf*cm, 30 ft.*lbf }

   3. Connect the neutral position switch connector.

2. INSTALL FRONT WHEEL LH

   Torque:

   103 N*m  { 1050 kgf*cm, 76 ft.*lbf }