SHIFT LEVER ASSEMBLY(for TMC Made) INSTALLATION

PROCEDURE


  1. INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY


    1. Install the floor shift shift lever assembly with the 4 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

    2. Engage the 2 wire harness clamps.

  2. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A01VKD8E02
      Text in Illustration
      *1 Control Select Cable
      *2 Clip A
      *3 Control Shift Cable
      *4 Clip B
      *a Protruding Portion
      *b Lock

      Install the control shift cable to the shift lever retainer.

      Note


      • Install the cable with the protruding portion of the cable outer facing upward.

      • After installing, check that the lock of the cable outer is protruding beyond portion A, as shown in the illustration.

    2. Install the control select cable to the shift lever retainer.

      Note


      • Install the cable with the protruding portion of the cable outer facing upward.

      • After installing, check that the lock of the cable outer is protruding beyond portion A, as shown in the illustration.

    3. Connect the control shift cable to the shift lever.

    4. Connect the control select cable to the shift lever with the clip A.

      Note


      • Connect the control select cable so that the adjusting mechanism lock of the control select cable is installed on the left side of the vehicle.

      • Insert the clip in the direction shown in the illustration.

    5. Engage the clip B and connect the end part of the transmission control shift cable to the floor shift shift lever assembly.

  3. ADJUST TRANSMISSION CONTROL SELECT CABLE

    Click here

  4. INSTALL REAR CONSOLE BOX

    Click here