SHIFT LEVER ASSEMBLY(for TMC Made) REMOVAL

PROCEDURE


  1. REMOVE REAR CONSOLE BOX

    Click here

  2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A01VLZAE02
      Text in Illustration
      *1 Control Select Cable
      *2 Clip A
      *3 Control Shift Cable
      *4 Clip B
      *5 Shift Lever Retainer
      *6 Nut
      *a Rotate 180°

      Disconnect the transmission control shift cable from the shift lever assembly.

    2. Remove the clip A and disconnect the control select cable from the floor shift shift lever assembly.

    3. Widen the clip B and disconnect the end part of the control shift cable from the floor shift shift lever assembly.

    4. Rotate the nut clockwise approximately 180° and, while holding the nut in that position, separate the control shift cable from the shift lever retainer.

      Note

      Do not rotate the nut excessively as it may damage the internal spring and the transmission control cable assembly will not be reusable.

    5. Rotate the nut clockwise approximately 180° and, while holding the nut in that position, separate the control select cable from the shift lever retainer.

      Note

      Do not rotate the nut excessively as it may damage the internal spring and the transmission control cable assembly will not be reusable.

  3. REMOVE FLOOR SHIFT SHIFT LEVER ASSEMBLY


    1. Disengage the 2 wire harness clamps.

    2. A01VJ1P

      Remove the 4 bolts and the floor shift shift lever assembly.