TRANSMISSION CONTROL CABLE(for TMMF Made) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE BATTERY

    Click here

  4. REMOVE BATTERY TRAY

  5. REMOVE BATTERY CARRIER

    Click here

  6. REMOVE EXHAUST PIPE

    Click here

  7. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR

    Click here

  8. REMOVE REAR CONSOLE BOX

    Click here

  9. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

    Click here

  10. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

    A01VDSDE02

    1. Remove the 2 A clips and separate the 2 cables from the control cable bracket.

    2. Remove the 2 B clips and disconnect the 2 cables from the manual transaxle assembly.

    3. A01VJJO

      Remove the 4 nuts and the transmission control cable assembly.