TRANSMISSION CONTROL CABLE(for TMC Made) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE BATTERY

    Click here

  4. REMOVE BATTERY TRAY

  5. REMOVE BATTERY CARRIER

    Click here

  6. REMOVE EXHAUST PIPE

    Click here

  7. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR


    1. A00499Q

      Remove the nut, the 2 bolts and the front No. 2 floor heat insulator.

  8. REMOVE REAR CONSOLE BOX

    Click here

  9. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

    Click here

  10. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

    A0048I4E02

    1. Remove the 2 A clips and separate the 2 cables from the control cable bracket.

    2. Remove the 2 B clips and disconnect the 2 cables from the manual transaxle assembly.

    3. A004ARW

      Remove the 3 nuts and the transmission control cable assembly.