MANUAL TRANSAXLE OIL REPLACEMENT

PROCEDURE


  1. DRAIN MANUAL TRANSAXLE OIL


    1. Stop the vehicle in a level place.

    2. A01VGQJE03
      Text in Illustration
      *1 Manual Transmission Filler Plug
      *2 Manual Transmission Drain Plug

      Remove the manual transmission filler plug and the gasket.

    3. Using a socket hexagon 10 mm, remove the manual transmission drain plug and gasket, and then drain the manual transaxle oil.

    4. Using a socket hexagon 10 mm, install a new gasket and the manual transmission drain plug.

      Torque:
      45 N*m  { 459 kgf*cm, 33 ft.*lbf }

  2. ADD MANUAL TRANSAXLE OIL


    1. Add manual transaxle oil.

      Capacity (Reference)
      2.4 liters (2.5 US qts, 2.1 Imp. qts)
      Gear oil type
      "TOYOTA Genuine Manual Transmission Gear Oil LV" or "API GL-4 and SAE 75W"
    2. A01VLXME51
      Text in Illustration
      *a 0 to 5 mm (0 to 0.197 in.)

      Check that the oil surface is within 5 mm (0.197 in.) of the bottom of the manual transmission filler plug opening.

      Note


      • Excessively large or small amounts of oil may cause problems.

      • After replacing the oil, drive the vehicle and check the oil level again.

    3. A01VEGUE02
      Text in Illustration
      *1 Manual Transmission Filler Plug

      Install the manual transmission filler plug and a new gasket.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }

  3. INSPECT MANUAL TRANSAXLE OIL LEVEL

    Click here

  4. INSPECT FOR MANUAL TRANSAXLE OIL LEAK