BACK-UP LIGHT SWITCH INSTALLATION

PROCEDURE

1. INSTALL BACK-UP LIGHT SWITCH ASSEMBLY

   
   

   1. 

      Using SST, install a new gasket and back-up light switch assembly to the manual transaxle assembly.

      SST

      09817-16011

      Torque:

      40 N*m  { 410 kgf*cm, 30 ft.*lbf }

   2. Engage the 2 wire harness clamps.

   3. Connect the back-up light switch connector.

2. INSTALL ENGINE MOUNTING BRACKET LH

   Click here

3. INSTALL ENGINE MOUNTING INSULATOR LH

   Click here

4. INSTALL BATTERY CARRIER

   Click here

5. INSTALL BATTERY TRAY

6. INSTALL BATTERY

   Click here