BACK-UP LIGHT SWITCH REMOVAL

PROCEDURE


  1. REMOVE BATTERY

    Click here

  2. REMOVE BATTERY TRAY

  3. REMOVE BATTERY CARRIER

    Click here

  4. SUPPORT MANUAL TRANSAXLE ASSEMBLY


    1. A01VITIE02
      Text in Illustration
      *a Wooden Block

      Support the manual transaxle assembly with a jack and a wooden block.

  5. REMOVE ENGINE MOUNTING INSULATOR LH

    Click here

  6. REMOVE ENGINE MOUNTING BRACKET LH

    Click here

  7. REMOVE BACK-UP LIGHT SWITCH ASSEMBLY


    1. Disconnect the back-up light switch connector.

    2. A01VJ7B

      Disengage the 2 wire harness clamps.

    3. A01VKATE01

      Using SST, remove the back-up light switch assembly and gasket from the manual transaxle assembly.

      SST
      09817-16011