TRANSMISSION CONTROL CABLE(for TMMF Made) REMOVAL

PROCEDURE


  1. REMOVE BATTERY

    Click here

  2. REMOVE BATTERY TRAY

    Click here

  3. REMOVE BATTERY CARRIER

    Click here

  4. REMOVE FRONT FLOOR CENTER BRACE

    Click here

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Click here

  6. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR


    1. A01VEPR

      Remove the 2 bolts and front No. 2 floor heat insulator.

  7. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  8. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A01VDTUE01
      Text in Illustration
      *1 Control Shift Cable

      Disconnect the control shift cable from the shift lever.

      Tech Tips

      Push the cable end at an angle and remove it.

    2. A01VKLCE01
      Text in Illustration
      *1 Control Select Cable

      Remove the clip and disconnect the control select cable from the shift lever.

    3. A01VIXS

      Pinch the protrusion of the transmission control cable assembly and pull the cable upward.

    4. A01VGGPE03

      Remove the 2 A clips and separate the 2 cables from the control cable bracket.

    5. Remove the 2 B clips and disconnect the 2 cables from the manual transaxle assembly.

    6. A01VJJO

      Remove the 4 nuts and transmission control cable assembly.