SHIFT AND SELECT LEVER SHAFT DISASSEMBLY

PROCEDURE


  1. REMOVE INNER NO. 1 SHIFT LEVER


    1. A01VK8Y

      Using a pin punch and hammer, remove the inner No. 1 shift lever slotted pin from the shift and select lever shaft.

      Tech Tips

      Check the orientation of the inner No. 1 shift lever.

    2. A01VEBF

      Using 2 screwdrivers and a hammer, remove the snap ring from the shift and select lever shaft.

      Tech Tips

      Use a piece of cloth to prevent the snap ring from flying off.

    3. A01VHOC

      Remove the inner No. 1 shift lever and shift interlock plate from the shift and select lever shaft.

  2. REMOVE LOCK BALL HOLDER


    1. A01VL9T

      Remove the lock ball holder.

  3. REMOVE SELECT RETURN COMPRESSION SPRING


    1. A01VEAI

      Remove the select return compression spring from the shift and select lever shaft.

  4. REMOVE NO. 2 SELECT SPRING SEAT


    1. A01VJLJ

      Remove the No. 2 select spring seat from the shift and select lever shaft.

  5. REMOVE SELECT LEVER SHAFT


    1. A01VGX4

      Remove the bolt and pull out the select lever shaft from the control shaft cover.

  6. REMOVE SELECT INNER LEVER


    1. A01VH5Y

      Remove the select inner lever from the control shaft cover.

  7. REMOVE SHIFT AND SELECT LEVER SHAFT


    1. A01VKPVE03
      Text in Illustration
      *a Rope or equivalent

      Using 2 screwdrivers and a hammer, remove the snap ring from the shift and select lever shaft.

      Tech Tips

      Lifting the control shaft cover up with a piece of rope or the equivalent makes the work easier.

    2. A01VF2M

      Remove the shift and select lever shaft with the shift lever boot from the control shaft cover.

    3. Remove the shift lever boot from the shift and select lever shaft.

  8. REMOVE SELECT LEVER SHAFT OIL SEAL


    1. A01VDK9

      Using a screwdriver with its tip wrapped with protective tape, pry out the select lever shaft oil seal from the control shaft cover.

  9. REMOVE CONTROL SHAFT COVER OIL SEAL


    1. A01VER3

      Using a screwdriver with its tip wrapped with protective tape, pry out the control shaft cover oil seal from the control shaft cover.