CLUTCH UNIT(for EC62) INSPECTION

PROCEDURE

1. INSPECT CLUTCH DISC ASSEMBLY

   
   

   1. 

      Using a vernier caliper, measure the rivet head depth.

      Minimum rivet depth
      0.3 mm (0.0118 in.)

      If necessary, replace the clutch disc assembly.

   2. Install the clutch disc assembly to the manual transaxle assembly.

      Tech Tips

      Insert the clutch disc assembly in the correct direction.

   3. 

      Using a dial indicator with a roller instrument, measure the clutch disc assembly runout.

      Maximum runout
      0.8 mm (0.0315 in.)

      If necessary, replace the clutch disc assembly.

2. INSPECT CLUTCH COVER ASSEMBLY

   
   

   1. 

      Using a vernier caliper, measure the depth and width of the diaphragm spring wear.

      Maximum
      A (Depth)
      0.5 mm (0.0197 in.)
      B (Width)
      6.0 mm (0.236 in.)

      If necessary, replace the clutch cover assembly.

3. INSPECT FLYWHEEL SUB-ASSEMBLY

   
   

   1. 

      Using a dial indicator, measure the flywheel sub-assembly runout.

      Maximum runout
      0.1 mm (0.00394 in.)

      If necessary, replace the flywheel sub-assembly.