CLUTCH STROKE SENSOR(for EC65A) INSTALLATION

PROCEDURE


  1. INSTALL CLUTCH STROKE SENSOR


    1. Apply MP grease to a new O-ring and install it to the clutch stroke sensor.

    2. A01VFG8E05
      Text in Illustration
      *a Sensor Arm (Sensor Side)
      *b Sensor Arm (Actuator Side)

      Set the clutch stroke sensor so that the sensor side and the actuator side sensor arms are in the positions shown in the illustration.

    3. Turn the clutch stroke sensor clockwise and fix it with the 2 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 17 in.*lbf }

    4. Connect the connector.

  2. INSTALL AIR CLEANER BRACKET

    Click here

  3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  4. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    Click here

  5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  6. PERFORM INITIALIZATION OF MULTI-MODE MANUAL TRANSAXLE SYSTEM

    Click here

  7. PERFORM LEARNING OF MULTI-MODE MANUAL TRANSAXLE SYSTEM

    Click here