CLUTCH RELEASE CYLINDER(for C551) INSTALLATION

PROCEDURE

1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY

   
   

   1. Install the clutch release cylinder assembly with the 2 bolts.

      Torque:

      for TMC Made

      12 N*m  { 120 kgf*cm, 9 ft.*lbf }

      for TMMF Made

      14 N*m  { 141 kgf*cm, 10 ft.*lbf }

2. CONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE

   
   

   1. Using a union nut wrench (10 mm), connect the clutch release cylinder to flexible hose tube to the clutch release cylinder assembly.

      Torque:

      15 N*m  { 155 kgf*cm, 11 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

3. INSTALL RELEASE CYLINDER HEAT INSULATOR

   
   

   1. Install the release cylinder heat insulator to the clutch release cylinder assembly with the 2 bolts.

      Torque:

      12 N*m  { 120 kgf*cm, 9 ft.*lbf }

4. FILL RESERVOIR WITH BRAKE FLUID (for TMC Made)

   Click here

5. FILL RESERVOIR WITH BRAKE FLUID (for TMMF Made)

   Click here

6. BLEED CLUTCH LINE

   Click here

7. INSPECT FOR BRAKE FLUID LEAK

8. INSPECT BRAKE FLUID LEVEL (for TMC Made)

   Click here

9. INSPECT BRAKE FLUID LEVEL (for TMMF Made)

   Click here