CLUTCH RELEASE CYLINDER(for C551) REASSEMBLY

PROCEDURE


  1. INSTALL RELEASE CYLINDER BLEEDER PLUG


    1. Install the release cylinder bleeder plug to the release cylinder body.

      Torque:
      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

  2. INSTALL CLUTCH RELEASE CYLINDER KIT


    1. Install the release cylinder bleeder plug cap to the release cylinder bleeder plug.

    2. A01VJ3R

      Coat a new piston with lithium soap base glycol grease as shown in the illustration.

      Text in Illustration
      A01VL3H Lithium soap base glycol grease

    3. Install the piston and a new spring to the release cylinder body.

      Note

      Do not damage the inside of the release cylinder body.

      Tech Tips

      Install the smaller end of the spring to the piston.

    4. Install a new boot to the push rod.

    5. Install the boot and the push rod to the release cylinder body.