TRANSMISSION CONTROL CABLE(for TMC Made) ADJUSTMENT

PROCEDURE


  1. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  2. ADJUST TRANSMISSION CONTROL SELECT CABLE


    1. A01VEQKE01
      Text in Illustration
      *1 Control Select Cable

      Remove the clip and disconnect the control select cable from the shift lever assembly.

    2. A01VJK1E01
      Text in Illustration
      *1 Adjuster Case Cover

      Slide the adjuster case cover in the direction shown in the illustration.

    3. A01VGOBE01
      Text in Illustration
      *1 Lock Piece
      *2 Adjuster Case
      *3 Cable Rod

      Pull out the lock piece from the adjuster case.

    4. Install the control select cable to the shift lever assembly with the clip.

      Note


      • Make sure to adjust the length at the neutral shift position.

      • Make sure that the lock piece is protruding from the adjuster case.

    5. Gently pull the cable rod toward the rear of the vehicle by hand to pull the cable taut.

    6. Press the lock piece into the adjuster case and lock it.

    7. A01VKRSE01
      Text in Illustration
      *1 Adjuster Case Cover

      Slide the adjuster case cover in the direction shown in the illustration.

      Note

      Slide the cover past the protrusion portion of the lock piece.

  3. INSTALL REAR CONSOLE BOX ASSEMBLY

    Click here