MANUAL TRANSAXLE OIL REPLACEMENT

PROCEDURE


  1. DRAIN MANUAL TRANSAXLE OIL


    1. A01VFAOE02
      Text in Illustration
      *1 Filler Plug
      *2 Drain Plug

      Remove the filler plug and gasket.

    2. Remove the drain plug and gasket to drain the manual transaxle oil.

    3. Install a new gasket and the drain plug.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }

  2. ADD MANUAL TRANSAXLE OIL


    1. Add manual transaxle oil.

      Capacity (Reference)
      1.7 liters (1.8 US qts, 1.5 Imp. qts)
      Gear oil type
      "TOYOTA Genuine Manual Transmission Gear Oil LV" or "API GL-4 and SAE 75W"
    2. A01VLXME71
      Text in Illustration
      *a 0 to 5 mm (0 to 0.197 in.)

      Check that the oil surface is within 5 mm (0.197 in.) of the bottom of the manual transmission filler plug opening.

      Note

      Excessively large or small amounts of oil may cause problems.

    3. Install a new gasket and the filler plug.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }

      Note


      • When adding transaxle oil, make sure that the vehicle is level.

      • An excessively large or small amount of oil may cause problems.

      • After adding oil, drive the vehicle and recheck the oil level.

  3. INSPECT MANUAL TRANSAXLE OIL LEVEL

    Click here

  4. INSPECT FOR MANUAL TRANSAXLE OIL LEAK