OIL PUMP ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE ENGINE UNDER COVER LH

    Click here

  2. DRAIN CONTINUOUSLY VARIABLE TRANSAXLE FLUID

    Click here

  3. REMOVE OIL PUMP WITH MOTOR ASSEMBLY


    1. A0047GG

      Disconnect the oil pump with motor assembly connector.

    2. Remove the bolt to separate the wire harness clamp bracket from the oil pump with motor assembly.

    3. A0047N3

      Remove the 3 bolts and oil pump with motor assembly from the continuously variable transaxle assembly.

      Note

      The O-ring of the oil pump with motor assembly is not available as a supply part. As the O-ring is a non-reusable part, if the oil pump with motor assembly is removed, the oil pump with motor assembly must be replaced with a new one.