ENGINE STOP AND START ECU INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL ENGINE STOP AND START ECU

   
   

   1. Install the engine stop and start ECU to the junction block bracket with the 2 nuts.

      7.5 N*m

      76 kgf*cm

      66 in.*lbf

   2. Connect the 3 engine stop and start ECU connectors.

2. Click here

   INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

   Click here

3. Click here

   INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

4. Click here

   CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   5.4 N*m

   55 kgf*cm

   48 in.*lbf

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

5. Click here

   REGISTER NUMBER OF STARTER OPERATIONS

   (Click here)