ENGINE STOP AND START ECU INSTALLATION

PROCEDURE

1. INSTALL ENGINE STOP AND START ECU

   
   

   1. Install the engine stop and start ECU with the 2 nuts.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   2. Connect the 2 connectors of the engine stop and start ECU.

2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD)

   Click here

3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

   Click here

4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)

   Click here

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

   Click here

6. REGISTER NUMBER OF STARTER OPERATIONS

   Click here