CRUISE CONTROL MAIN SWITCH INSPECTION

PROCEDURE


  1. INSPECT CRUISE CONTROL MAIN SWITCH

    A01VJVKE01

    1. Measure the resistance and check the results in accordance with the value(s) in the table below.

      Text in Illustration
      *a

      Component without harness connected

      (Cruise Control Main Switch)

      		 *b Cruise Control Main Switch
      *c Lever *d ON/OFF
      *e -SET *f +RES
      *g CANCEL - -
      Standard resistance
      Tester Connection Switch Condition Specified Condition
      1(ECC) - 3(CCS) Main Switch off*1 1 MΩ or higher
      Main Switch on Below 2.5 Ω
      +RES 235 to 245 Ω
      -SET 617 to 643 Ω
      CANCEL 1509 to 1571 Ω

      *1: The lever is in the neutral position.

      If the result is not as specified, replace the cruise control main switch.