CLUTCH SWITCH(for RHD) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See page SUPPLEMENTAL RESTRAINT SYSTEMS > AIRBAG SYSTEM (w/ VSC) > PRECAUTION).

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Tech Tips

    Use the same procedure as for LHD Click here.

  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag)

    Click here

  5. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)

    Tech Tips

    Use the same procedure as for LHD Click here.

  6. REMOVE NO. 2 CLUTCH START SWITCH ASSEMBLY


    1. Disconnect the connector.

    2. A0049XS

      Remove the nut and the No. 2 clutch start switch assembly.