DRIVING SUPPORT ECU(for RHD) REMOVAL

PROCEDURE


  1. REMOVE COMBINATION METER ASSEMBLY

    Click here

  2. REMOVE DRIVING SUPPORT ECU ASSEMBLY


    1. A01VGV5

      Disconnect the connector from the driving support ECU assembly.

    2. Disengage the wire harness clamp from the driving support ECU bracket.

    3. Remove the bolt, nut and the driving support ECU assembly from the instrument panel reinforcement and the power steering ECU assembly.

    4. A01VEXY

      Remove the 2 nuts and the driving support ECU assembly from the driving support ECU bracket.