Click here

SPEED LIMITER SYSTEM PRECAUTION

Click here
Click here
Click here

  1. IGNITION SWITCH EXPRESSION

    Tip:

    The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

    Expression Ignition Switch (position) Engine Switch (condition)
    Ignition Switch off Off Off
    Ignition Switch ON ON On (IG)
    Ignition Switch ACC ACC On (ACC)
    Engine Start START Start

  2. HANDLING PRECAUTION FOR SPEED LIMITER SYSTEM


    1. Turn the speed limiter main switch off when not using the speed limiter system.

    2. Be careful as the vehicle speed increases when driving downhill with the speed limiter system on.

    3. The RESUME/ACCEL operation changes according to the speed limiter system status. When the speed limiter system is operating, ACCEL operates. When the speed limiter system is not operating, RESUME operates.

    4. When the speed limiter system is controlling vehicle speed and the speed limiter indicator changes to yellow (for Segment Display Type), or if it goes out and a warning message is displayed (for TFT Display Type), turn the speed limiter system off using the speed limiter switch to reset the speed limiter system. After resetting, if the speed limiter system cannot be turned on, or the speed limiter system is canceled immediately after being turned on, the system may have a malfunction.

    5. Do not use the speed limiter system where the road conditions are as follows:


      • Steep downhill

      • Roads with sharp turns

      • Icy or snowy roads

      • Slippery roads

    6. Do not use the speed limiter system when the vehicle is towing a trailer, etc.